The occurrence of light fluctuation coinciding with the operation of a laundry appliance indicates a potential electrical system issue. This manifestation typically involves a temporary dimming or pulsing of illumination within a building while the washing machine is actively cycling through its various operational phases, such as filling, washing, spinning, or draining. These cycles draw varying amounts of electrical current, leading to the observed effect on the lighting system.
Addressing this situation is crucial for several reasons. Firstly, it highlights a possible overload or inadequacy within the electrical circuits. Over time, repeated overloads can lead to overheating, insulation degradation, and an increased risk of electrical fires. Secondly, the consistent voltage fluctuations can potentially damage sensitive electronic equipment connected to the same circuit or electrical panel. Historical instances of similar electrical problems have demonstrated the importance of proactive inspection and remediation to prevent more serious consequences.
Understanding the underlying causes of this electrical behavior and implementing appropriate solutions are essential. Investigating the appliance’s power consumption, the wiring condition, and the capacity of the electrical panel are necessary steps to resolve the problem. Further discussion will detail potential root causes, diagnostic procedures, and corrective actions to mitigate the problem.
1. Voltage Fluctuation
Voltage fluctuation represents a key electrical phenomenon directly linked to the observation of lights flickering when a washing machine is in operation. The washing machine’s motor, during its start-up and operational cycles (wash, spin, drain), demands varying amounts of electrical current. This fluctuating current draw can induce a corresponding variation in the voltage supplied to other electrical devices connected to the same circuit or electrical panel. This voltage drop manifests as a temporary dimming or fluctuation in the brightness of lights. For instance, a washing machine with a motor requiring a high surge current during the spin cycle will pull a significant amount of power, temporarily reducing the available voltage for other appliances, including lighting fixtures. The magnitude of the voltage fluctuation determines the severity of the observed flicker.
The sensitivity of lighting to voltage changes further exacerbates the problem. Incandescent lights are particularly prone to noticeable brightness variations with even small voltage fluctuations. LED lighting, while generally more stable, can still exhibit flickering, especially if the driver circuitry is not designed to handle voltage variations effectively. Real-world scenarios include older homes with inadequate wiring or undersized electrical panels where the voltage drop is more pronounced, leading to easily observable and potentially disruptive light flicker. Furthermore, shared circuits between the washing machine and lighting circuits amplify the effect, as the appliance’s current demand directly impacts the available voltage for illumination.
In summary, voltage fluctuation, caused by the washing machine’s cyclical power demands, is a primary driver of the “lights flicker” phenomenon. Understanding this connection is essential for diagnosing and resolving the issue. Identifying the source and magnitude of the voltage drop, evaluating circuit capacity, and upgrading electrical infrastructure are crucial steps toward mitigating the problem and ensuring a stable and safe electrical environment. Addressing voltage fluctuations not only resolves the nuisance of flickering lights but also safeguards other electrical appliances from potential damage and reduces the risk of electrical hazards.
2. Circuit Overload
Circuit overload constitutes a significant factor contributing to the observed phenomenon of light flicker during washing machine operation. The condition arises when the total electrical current demand on a circuit exceeds its rated capacity. This imbalance between supply and demand often manifests as a voltage drop, which, in turn, impacts the performance of connected electrical devices, most notably lighting fixtures.
-
Excessive Current Draw
A primary cause of circuit overload is the cumulative current draw of multiple appliances and devices operating simultaneously on a single circuit. Washing machines, particularly during motor startup and spin cycles, exhibit high instantaneous current requirements. If the circuit is already burdened with other loads, such as lighting, electronics, or other appliances, the total current demand may surpass the circuit’s amperage rating, leading to overload. Examples include a washing machine operating on the same circuit as a space heater and multiple incandescent light fixtures. The implications extend to potential tripping of circuit breakers or fuses, interrupting power supply and posing safety risks.
-
Undersized Wiring
The gauge of wiring within a circuit dictates its current-carrying capacity. When wiring is undersized relative to the anticipated load, it can overheat, leading to voltage drops and an increased risk of electrical fires. In older buildings, wiring may not meet current electrical codes, resulting in inadequate capacity for modern appliances such as washing machines. For instance, a 15-amp circuit with 14-gauge wiring is typically insufficient to handle the combined load of a washing machine and other common household devices. The consequence is reduced voltage availability, causing lights to flicker, and long-term insulation degradation of the wiring.
-
Faulty Circuit Breakers
Circuit breakers are designed to protect electrical circuits from overload by automatically interrupting the current flow when the amperage exceeds the breaker’s rating. However, faulty or aging circuit breakers may fail to trip at their specified current threshold or may trip prematurely due to internal damage or wear. This can result in an overloaded circuit continuing to operate, leading to overheating of wiring and devices. A degraded breaker might allow a washing machine and multiple lights to operate concurrently on a circuit exceeding its safe capacity, causing persistent flickering and potential damage to electrical components.
-
Shared Neutrals
In some electrical installations, multiple circuits may share a common neutral wire. While this configuration can be permissible under certain conditions, it can lead to overload issues if the loads on the shared circuits are imbalanced. If the current on one circuit is significantly higher than the current on the other, the neutral wire may become overloaded, causing voltage drops and flickering lights. For example, if a washing machine is on one circuit and multiple lights are on a shared neutral circuit, the high current draw of the washing machine can cause the neutral wire to become overloaded, leading to flickering in the lights connected to the shared neutral.
The convergence of these factors directly contributes to the manifestation of light flicker when a washing machine is active. Mitigation strategies include redistributing electrical loads across multiple circuits, upgrading wiring to a larger gauge, replacing faulty circuit breakers, and ensuring proper neutral wiring configurations. Addressing circuit overload not only eliminates the nuisance of flickering lights but also enhances electrical safety and protects appliances from potential damage caused by voltage fluctuations.
3. Appliance Demand
Appliance demand, specifically the fluctuating power requirements of a washing machine during its operational cycles, directly influences the stability of the electrical supply and can result in observable light flicker. Understanding the characteristics of this demand is critical for diagnosing and mitigating related electrical disturbances.
-
Inrush Current
The initial energizing of the washing machine’s motor, particularly during the start of the wash and spin cycles, is characterized by a significant inrush current. This surge in current demand, often several times the appliance’s normal operating current, places a sudden load on the electrical circuit. For example, a washing machine rated at 5 amps may draw 20-30 amps for a brief period at startup. This transient overload can cause a temporary voltage drop on the circuit, leading to dimming or flickering of lights connected to the same electrical supply. The intensity of the light flicker is directly proportional to the magnitude and duration of the inrush current relative to the circuit’s capacity.
-
Cyclic Operation
The washing machine’s operational cycles (filling, washing, rinsing, spinning, draining) involve varying levels of electrical demand. The motor’s intermittent activation and deactivation throughout these cycles create a fluctuating load on the circuit. During the high-demand phases, such as the spin cycle, the motor draws a substantial amount of current. Conversely, during periods of inactivity, such as filling or draining, the current demand is significantly reduced. This cyclical variation in demand results in corresponding fluctuations in the circuit voltage, causing lights to flicker in sync with the washing machine’s operational phases. Older washing machines with less efficient motors tend to exhibit more pronounced fluctuations.
-
Power Factor
The power factor, a measure of how effectively an electrical appliance utilizes power, influences the overall load on the electrical system. Appliances with low power factors draw more reactive power, which contributes to increased current flow without performing useful work. Washing machines with induction motors can exhibit relatively low power factors, especially during startup. This increased reactive power demand can exacerbate voltage drops and contribute to light flicker. Power factor correction techniques, such as adding capacitors to the motor circuit, can improve the power factor and reduce the overall burden on the electrical system.
-
Harmonic Distortion
Modern washing machines with electronic controls and variable-speed motors can introduce harmonic distortion into the electrical system. Harmonic currents are multiples of the fundamental frequency (e.g., 60 Hz) that can distort the voltage waveform and increase the overall current demand. These harmonics can interfere with other electronic devices connected to the same circuit and contribute to light flicker. Harmonic filters can be employed to mitigate the impact of harmonic distortion and improve the stability of the electrical supply.
In summary, the interaction between the washing machine’s fluctuating appliance demand characterized by inrush current, cyclic operation, power factor, and harmonic distortion and the electrical system’s capacity is a primary determinant of the “lights flicker” phenomenon. Addressing the issues arising from appliance demand requires a comprehensive approach, including upgrading electrical infrastructure, employing power factor correction, and mitigating harmonic distortion, to ensure a stable and reliable power supply.
4. Wiring Condition
The state of electrical wiring is a crucial determinant in the manifestation of light flicker during washing machine operation. Deteriorated, undersized, or improperly installed wiring significantly impedes the efficient delivery of electrical power, exacerbating voltage drops and causing observable disturbances in lighting systems. When a washing machine initiates a cycle, particularly the high-demand spin cycle, it requires a substantial surge of current. If the wiring is compromised, it cannot adequately supply this current, leading to a voltage sag that manifests as flickering lights. An example is found in older homes where original wiring, often insufficient by contemporary standards, struggles to meet the demands of modern appliances. Such situations can result in repeated light flicker each time the washing machine motor engages.
Beyond insufficient gauge, the physical condition of wiring plays a vital role. Corroded connections, damaged insulation, and loose terminations increase resistance within the electrical circuit. This elevated resistance restricts current flow and generates heat, further contributing to voltage drops. A common scenario involves aluminum wiring, prevalent in some mid-20th century constructions, which is prone to oxidation. The resulting aluminum oxide layer acts as an insulator, hindering conductivity. Moreover, improper wiring practices, such as relying on back-stab connections instead of secure screw terminals, can lead to loose connections that intermittently interrupt current flow. This interruption amplifies voltage fluctuations, causing pronounced flickering. The integrity of grounding connections also influences the stability of the electrical system. Inadequate or absent grounding increases susceptibility to voltage surges and electrical noise, which can translate to observable light flicker when the washing machine cycles.
In conclusion, the condition of electrical wiring is inextricably linked to the occurrence of light flicker associated with washing machine operation. Addressing wiring deficiencies, through upgrades to appropriately sized conductors, replacement of deteriorated sections, and meticulous attention to connection integrity, is essential for mitigating voltage drops and ensuring a stable electrical supply. Identifying and rectifying wiring issues not only resolves the nuisance of flickering lights but also enhances electrical safety, reduces the risk of fire hazards, and prolongs the lifespan of connected appliances. A comprehensive electrical inspection is a critical step in diagnosing and resolving these problems effectively.
5. Panel Capacity
Electrical panel capacity is a critical factor influencing the stability of voltage supply within a building, and a limitation in this capacity is often directly linked to the occurrence of light flicker when a washing machine is in operation. An undersized or overloaded electrical panel struggles to provide the necessary current demanded by the washing machine, especially during peak cycles, leading to noticeable voltage drops that manifest as flickering lights.
-
Insufficient Amperage Rating
The main service panel has a maximum amperage rating that determines the total electrical load it can safely handle. If the combined amperage requirements of all circuits and appliances exceed this rating, the panel becomes overloaded. For example, a panel rated for 100 amps may be insufficient if the building houses numerous high-demand appliances such as a washing machine, electric dryer, air conditioner, and electric water heater. When the washing machine motor starts, particularly during the spin cycle, it draws a significant current surge. If the panel is already near its capacity, this surge causes a substantial voltage drop throughout the electrical system, resulting in lights flickering. Upgrading the panel to a higher amperage rating (e.g., 200 amps) may be necessary to accommodate the load.
-
Circuit Breaker Limitations
Individual circuit breakers within the panel protect each circuit from overcurrent situations. The panel’s overall capacity is also constrained by the limitations of these individual breakers and the total number of available breaker slots. If there are no available slots to add a dedicated circuit for the washing machine, it may be connected to an existing circuit already serving other appliances or lights. This can lead to an overloaded circuit, especially during the washing machine’s peak demand phases. Even if the overall panel capacity is sufficient, the circuit to which the washing machine is connected may be overloaded. The impact is amplified if the breaker is old or faulty, potentially failing to trip promptly under overcurrent conditions, leading to sustained voltage drops and increased light flicker.
-
Distribution of Load
An inefficient distribution of electrical load across the panel’s available circuits can also contribute to light flicker. If most of the high-demand appliances are concentrated on one side of the panel, it can create an imbalance and result in localized voltage drops. For example, if the washing machine, electric dryer, and electric range are all connected to circuits on the same side of the panel, that side will experience a significantly higher load than the other. This unequal distribution can cause voltage fluctuations and light flicker, particularly in lights connected to circuits on the heavily loaded side of the panel. Balancing the load by distributing the high-demand appliances across multiple circuits and both sides of the panel can improve voltage stability.
-
Bus Bar Integrity
The bus bars within the electrical panel serve as the distribution point for electrical current to each circuit breaker. Corrosion or loose connections on the bus bars can introduce resistance, impeding the flow of current and contributing to voltage drops. Over time, aluminum bus bars are especially prone to oxidation, leading to decreased conductivity. Similarly, loose connections can create hotspots, increasing resistance and voltage fluctuations. When the washing machine draws a high current, these issues are amplified, causing noticeable light flicker. Regular inspection and maintenance of the panel, including cleaning corroded bus bars and tightening connections, are essential for maintaining optimal panel performance.
Ultimately, the relationship between panel capacity and light flicker associated with washing machine operation underscores the importance of a well-designed and maintained electrical system. A panel with sufficient amperage, properly loaded circuits, and sound internal components is necessary to meet the fluctuating demands of modern appliances. Addressing panel capacity limitations is not only essential to prevent light flicker but also critical for ensuring the safety and reliability of the entire electrical infrastructure.
6. Grounding Issues
Grounding issues are a critical, yet often overlooked, factor contributing to the phenomenon of light flicker observed during the operation of a washing machine. A properly functioning grounding system ensures a safe and stable electrical path for fault currents, preventing voltage fluctuations that can manifest as light flicker. Conversely, deficiencies in the grounding system can disrupt the electrical balance, leading to various adverse effects, including the perceptible dimming or pulsing of lights.
-
Absence of Ground Connection
The complete absence of a ground connection provides no path for fault current to return to the source. In this scenario, a fault within the washing machine, such as a short circuit to the chassis, can elevate the chassis potential to a dangerous voltage level. While this alone might not always cause immediate light flicker, it compromises the safety of the entire electrical system. Subsequent faults or surges can then propagate through the system, causing voltage instability and light flicker. Homes with outdated two-wire systems lacking a dedicated grounding conductor are particularly vulnerable.
-
High-Resistance Ground Connection
Even when a ground connection exists, high resistance within the ground path can impede the flow of fault current. This elevated resistance can be caused by corroded connections, loose terminations, or undersized grounding conductors. When a fault occurs, the increased resistance limits the amount of current that can flow to trip the circuit breaker, allowing the voltage to rise on the grounding system. This elevated voltage can affect the operation of other electrical devices, including lighting, leading to observable flicker. For example, a corroded ground rod or a loose connection at the service panel can significantly increase ground resistance.
-
Shared Neutral-Ground Bond
In modern electrical systems, the neutral and ground conductors are bonded together only at the main service panel. Bonding at other locations, such as subpanels or outlets, can create multiple paths for neutral current to flow. This can lead to current flowing through the grounding conductor, creating voltage drops along the ground path. These voltage drops can manifest as light flicker or, more seriously, create a shock hazard. Improper wiring during renovations or additions is a common cause of unintentional neutral-ground bonds. The increased current flow through the ground wire creates a circulating current which effects sensitive appliance.
-
Ground Loops
Ground loops occur when multiple ground paths exist between two or more electrical devices. This can create circulating currents in the grounding system, which can induce noise and voltage fluctuations. These fluctuations can be particularly problematic for sensitive electronic equipment, including lighting systems with electronic ballasts or LED drivers. Ground loops can be created by interconnecting equipment with different ground potentials or by having multiple ground rods connected to the same grounding system. These loops disrupt the balance and cause a myriad of electrical problems.
The presence of grounding issues directly impacts the performance and safety of electrical systems. The “lights flicker” phenomenon is often an early indicator of underlying grounding problems. Addressing these problems through proper inspection, testing, and repair of the grounding system is crucial for ensuring a stable electrical supply, preventing voltage fluctuations, mitigating electrical hazards, and safeguarding electronic equipment from damage. Identifying and correcting grounding issues is a fundamental aspect of maintaining a safe and reliable electrical infrastructure.
7. Component Wear
Degradation of electrical and mechanical components, a natural consequence of operational lifespan and usage, significantly contributes to the occurrence of light flicker during washing machine operation. Component wear within both the washing machine itself and the building’s electrical infrastructure can compromise performance, leading to increased current draw, voltage fluctuations, and, ultimately, the observable dimming or flickering of lights. The following details the interplay between specific aspects of component degradation and its manifestation in electrical instability.
-
Motor Brush Wear
In washing machines employing brushed motors, the carbon brushes responsible for transferring electrical current to the rotating armature are subject to continuous mechanical wear. As these brushes wear down, the contact resistance between the brush and commutator increases. This elevated resistance leads to increased current draw to maintain motor speed and torque. The increased current, particularly during the high-demand spin cycle, can cause voltage drops on the electrical circuit, resulting in light flicker. The flickering becomes more pronounced as the brushes wear further, requiring eventual replacement to restore stable motor operation and reduce electrical disturbances. A worn motor brush might also cause intermittent sparking, generating electrical noise that further exacerbates the flickering effect.
-
Capacitor Degradation
Capacitors within the washing machine’s motor circuit play a crucial role in smoothing out voltage fluctuations and improving the motor’s power factor. Over time, these capacitors can degrade due to heat, voltage stress, and electrolyte leakage. As a capacitor’s capacitance decreases, its ability to filter voltage spikes and provide reactive power diminishes. This results in increased harmonic distortion and voltage instability on the circuit. The diminished capacitance can also lead to increased inrush current during motor start-up, causing a more significant voltage drop and pronounced light flicker. Replacing degraded capacitors is often necessary to restore proper motor operation and reduce electrical noise.
-
Relay Contact Deterioration
Washing machines utilize relays to switch between different operational modes, such as wash, rinse, and spin cycles. The contacts within these relays are subjected to repeated mechanical and electrical stress. Over time, the contacts can become corroded, pitted, or worn, increasing their contact resistance. This elevated resistance leads to voltage drops and can cause intermittent power interruptions to various washing machine components. The fluctuating power supply to the motor, caused by deteriorated relay contacts, can result in erratic motor operation and corresponding light flicker. Replacing or cleaning the relay contacts can restore stable operation and mitigate these electrical disturbances.
-
Wiring Insulation Breakdown
The electrical wiring within both the washing machine and the building’s electrical system is susceptible to insulation breakdown due to heat, moisture, and physical stress. As the insulation deteriorates, the risk of short circuits and ground faults increases. These faults can draw excessive current, causing voltage drops and light flicker. Additionally, degraded insulation can lead to leakage currents, which can interfere with the proper operation of other electrical devices. Regular inspection and replacement of wiring with compromised insulation are crucial for preventing electrical hazards and ensuring a stable power supply. Old or brittle insulation will need to be changed before further issue arrive.
In summary, component wear, encompassing motor brushes, capacitors, relay contacts, and wiring insulation, introduces electrical instability that precipitates the “lights flicker” phenomenon during washing machine cycles. Replacement or maintenance of these degraded components will stabilize operation and solve the lights flicker problem.
Frequently Asked Questions
This section addresses common inquiries related to the issue of lights flickering during the operation of a washing machine. The information provided is intended to offer clarity and guidance for understanding and resolving this electrical phenomenon.
Question 1: Is light flicker during washing machine use inherently dangerous?
Light flicker, while often a nuisance, can indicate underlying electrical problems that pose safety risks. Persistent or severe flickering suggests a potential overload, wiring issue, or grounding fault. These conditions can lead to overheating, insulation damage, and an increased risk of electrical fire. A qualified electrician should inspect the electrical system to assess the severity of the problem and implement necessary repairs.
Question 2: Can a washing machine cause damage to other appliances due to light flicker?
Yes, the voltage fluctuations associated with light flicker can potentially damage sensitive electronic appliances. Repeated voltage sags and surges can stress components in devices such as computers, televisions, and audio equipment. A surge protector can offer limited protection, but addressing the root cause of the voltage fluctuations is crucial to prevent long-term damage. Additionally, consistent electrical disturbances reduce the lifespan of electrical appliances.
Question 3: Why does light flicker typically occur during specific washing machine cycles?
Light flicker is most commonly observed during the washing machine’s motor startup and spin cycles. These phases require the highest electrical current, placing a significant load on the circuit. The sudden surge in current can cause a temporary voltage drop, leading to dimming or flickering of lights connected to the same circuit. The filling and draining cycles typically require less power and are less likely to cause noticeable flicker.
Question 4: Is the issue always with the washing machine itself or could it be the house’s electrical system?
The issue can stem from either the washing machine or the house’s electrical system. Problems within the washing machine, such as a failing motor or capacitor, can cause excessive current draw. Alternatively, the issue may lie within the building’s electrical system, such as inadequate wiring, an overloaded circuit, a faulty circuit breaker, or grounding problems. A thorough inspection by an electrician is necessary to isolate the root cause.
Question 5: Can replacing incandescent bulbs with LEDs resolve the light flicker problem?
While replacing incandescent bulbs with LEDs might reduce the severity of the perceived flicker, it does not address the underlying electrical problem. LEDs generally consume less power, reducing the overall load on the circuit. However, the voltage fluctuations caused by the washing machine will still be present and can potentially damage the LED drivers over time. Addressing the root cause is a more effective and sustainable solution.
Question 6: How can one determine if the electrical panel is overloaded?
Determining whether the electrical panel is overloaded requires a professional assessment. An electrician can measure the current draw on each circuit and compare it to the breaker rating. Signs of overload include frequent tripping of circuit breakers, warm or hot electrical outlets, and dimming lights when multiple appliances are operating. A visual inspection of the panel’s condition, including bus bar corrosion and wiring integrity, is also essential.
In summary, the “lights flicker when washing machine runs” symptom warrants careful investigation. Electrical safety and long-term appliance health necessitate a comprehensive diagnostic and remediation approach.
The next section will detail troubleshooting and resolution strategies for this issue.
Mitigating “Lights Flicker When Washing Machine Runs”
Addressing light flicker concurrent with washing machine operation necessitates a systematic approach. Implementation of the subsequent measures can contribute to the diagnosis and mitigation of this electrical anomaly.
Tip 1: Conduct a Comprehensive Electrical Load Assessment: Analyze the total amperage demand on the circuit serving the washing machine. Ensure the circuit’s capacity, as defined by the circuit breaker rating, is not exceeded when the washing machine operates in conjunction with other appliances or lighting. An overloaded circuit is a primary cause of voltage drops.
Tip 2: Inspect and Upgrade Wiring: Assess the gauge and condition of wiring connected to the washing machine circuit. Undersized or deteriorated wiring increases resistance, impeding current flow and exacerbating voltage fluctuations. Consider replacing old or inadequate wiring with appropriately sized conductors that meet current electrical codes.
Tip 3: Evaluate and Enhance Grounding: Verify the integrity of the grounding system. A properly functioning ground path ensures a safe and stable electrical reference. Check for corroded connections, loose terminations, or undersized grounding conductors. Correct any deficiencies to prevent voltage fluctuations and mitigate electrical hazards.
Tip 4: Dedicate a Circuit: Where feasible, allocate a dedicated electrical circuit solely for the washing machine. This minimizes the potential for shared loads to contribute to voltage drops during peak operation. A dedicated circuit ensures that the washing machine receives the necessary current without competing with other appliances.
Tip 5: Examine Appliance Condition: Inspect the washing machine itself for potential electrical issues. Worn motor brushes, failing capacitors, or internal wiring faults can contribute to excessive current draw. Engage a qualified appliance technician to diagnose and repair any identified problems.
Tip 6: Consider Power Factor Correction: For washing machines employing induction motors, explore the implementation of power factor correction techniques. Improving the power factor reduces the reactive power demand, minimizing voltage fluctuations and enhancing overall energy efficiency. Consult with an electrician to determine the feasibility of power factor correction.
These measures, when implemented effectively, contribute to a more stable and reliable electrical supply, diminishing the likelihood of light flicker during washing machine use. Proactive management of electrical loads, infrastructure, and appliance health forms the cornerstone of a safe and efficient electrical system.
The subsequent section will present the final conclusions of this analysis.
Conclusion
The investigation into light flicker occurring during washing machine operation reveals a complex interplay of factors within both the appliance and the building’s electrical infrastructure. Voltage fluctuations, circuit overloads, appliance demand characteristics, wiring condition, panel capacity limitations, grounding deficiencies, and component wear all contribute to this phenomenon. A thorough assessment of these elements is paramount for accurate diagnosis and effective remediation.
Addressing the root cause of this electrical behavior is not merely a matter of convenience, but one of safety and system longevity. Prompt action in response to persistent light flicker is crucial for preventing potential electrical hazards, mitigating damage to sensitive appliances, and ensuring the reliable operation of the building’s electrical system. Consultation with a qualified electrician is strongly advised to conduct a comprehensive evaluation and implement appropriate corrective measures.
